Very cool. Was this a test piece or do you intend to do CNC carving like this in the future? What finish do you think you’ll use? Any surface prep ahead of time like sanding? Details on the CNC?
So many questions!
Very cool. Was this a test piece or do you intend to do CNC carving like this in the future? What finish do you think you’ll use? Any surface prep ahead of time like sanding? Details on the CNC?
So many questions!
A+ reply in every way, bravo!
Another vote for pine. That said, I think that pine gets a bit of a bad rap. Other than its softness, it’s a fine wood to use. I have pallet and firewood laminated desk that has it’s fair share of pine in it and the pine strips are not any worse for wear than anything else.
It’s pretty annoying in 10 too. I had a big scratch folder on my desktop and one day it decided to start syncing with one drive after a restart and one of those setup/welcome like screens.
Thanks! I’m guessing oil based applied over many many years and the low spots are due to a mixture of mechanical damage (it is a park table after all) and flaking?
We’re in SE MI, so I wouldn’t call it particularly moist but it’s not super dry either. The weather out here is very similar to what I experienced in New England
Edit: based on surface wear and looking at these things for years now, it’s been a few years since the last time they were refinished and there’s no flaking.
If it helps there are decent drips on the bottom side that remind me of poly drips when I was getting started with poly. The total thickness in the high spots is easily 1/16, if not 1/8.
Thanks for the photo! I now realize that the top sits on the pieces that run perpendicular to them and it all comes out as one piece. For some reason I was thinking that they fit onto a lip or something on the box side.
Clearly, I’ve never seen this style cutting board before lol.
TIL these are a thing. Nice work! Have a picture of the box it sits in without the insert in?
AWD, yes. V8, not sure. I think they share some underpinnings with the s10, so even if they didn’t come out of factory with one it wouldn’t be a hard swap.
I have a coworker who did a frame off (yes, they had a partial frame) restoration of their astro van. Some of those astro van people are really into them.
If your sawdust is free of things like glue and finishes, put some in your compost pile if you have one! You too can grow fine mushrooms.
I work at a big company. We have tons and tons of problems to go solve that are getting little attention in addition to having a lot of redundant and/or “what would you say you do here” type positions. Most of this happens by accident, but it’s nearly impossible to unwind and redeploy those teams. My guess is that the big reasons why is because of leadership not wanting to look bad - a mix of “why did you staff this to begin with?” and “why did you let this go on for so long?” When these groups are eventually found during a reorg they tend to be let go vs redeployed, which makes it even harder for the remaining groups to do anything. The cycle is truly silly.
A track saw is rigidly mounted to the track. As long as you clamp the track square, you should be good to go.
I agree with your overall sentiment, but I personally find googles fuel savings optimistic and/or flat out misleading. “Hey, you could turn off your usual route here and get there in a similar time… Or you could stay on your usual route and save 2% on gas” seems to be a very frequent occurrence for me.
I also don’t think that needs AI. The pathfinding algorithm just needs to apply different weights to the choices based on things like changes in elevation, number of stop signs, total distance, etc. Navigation systems from yester-year could do this well before the prevalence of AI. That said, AI can be used to develop and/or tune these algorithms instead of having a dedicated team of humans focused on this specific area.
Have any size/weight/portability restrictions?
It looks like the Rigid R4560 is the current incarnation of the table saw I have.
It’s hard to go wrong with craigslist if you live in a decently dense area. Worst case, you can always sell it for around what you paid for it.
If you’re going to be cutting large pieces of wood, having a heavy saw will give you more stability. You’re also going to need something to help with indeed and out feed if you’re going to try to cut something like a 2x4.
As an alternative, or potentially a companion, consider a track saw and sawhorses or even a circular saw with something like this. I break down large pieces of wood this way now and then being them to my table saw.
Duck Duck Go is repackaged Bing and Yahoo for the most part. - Said as a duck duck go user
At some point I should really try out one of the paid search options…
Really? Pixels have had that function for a while now. I always assumed it was stock.
We have two kids in a 3 bed/2 bath 1350 sq ft home. We do have a full basement, but the kids aren’t really allowed down there (power tools, toy stash, etc). I guess I do hang out there some nights, but that’s only because my gaming computer moved downstairs years ago when our oldest started to be able to reach the keyboard and pull key caps off it.
In our experience, you’re probably not going to do a lot of entertaining while you have young kids. While one of your kids is under 3-4, and sometimes older, they’re going to need naps. They’re also going to have early bedtimes. Naps are mostly behind us, and we do have afternoon play dates, but the kids don’t really care what space they’re in as long as they’re engaged and have things to do. Having an adult gathering is… very rare. We have a nice sized yard, so we tend to have gatherings outside.
I don’t think we need extra bedrooms or bigger bedrooms/bathrooms. An office might be nice, but working from the basement works just as well. A toy room could be nice, but to me it would be wasted space as the kids get older and have fewer, but larger/more engaging, toys. At least around here, the extra room comes with extra walls that result in a space that’s not often used (think a formal dining room).
There’s also the financial side of things. We could afford a larger house, but would rather be putting any extra into 529s, our own 401ks, etc. Kid related expenses really add up before you start also thinking about a bigger mortgage payment.
Or random application availability and/or ease of use.
Two cases in point:
Things are certainly better now than they have been in the past, but if you’re somewhat time limited (eg your computer is more of a tool than a thing to spend time tweaking) Linux can still be a bit offputting - especially if some of the core applications you use aren’t officially supported.